The long-awaited INOX pipe saw, developed based on customer wishes, is specifically targeted at stainless and acid-resistant pipe materials.
To avoid contamination, all parts in contact with the pipe are also made of stainless steel, so you can work with the most challenging materials without fear of subsequent corrosion on the pipe wall. Have thick pipes been problematic in the past? Not anymore! With a powerful motor this tool can easily cut pipes up to 15 mm wall thickness. This machine combined with the new INOX blade is unbeatable combination if you are looking for an easy-to-handle cutter for a job where speed and quality of cuts are key factors.
1. Exact PipeCut System Shoulder Bag
2. Exact PipeCut 360 INOX Series with INOX 140 saw blade pre-installed
3. Pipe Cutting supports 1 + 2 pcs
4. Operating instructions
5. Allen key 2 pcs (5 mm and 2 mm), attached to saw
| Pipe material | Stainless/Inox steel |
|---|---|
| Pipe OD | 75mm – 360mm (3”- 14”) |
| Max. wall thickness | 12 mm (0.5”) steel / 120V, 15 mm (0.6”) steel / 230V, 50 mm (2”) plastic |
| No-Load speed | I (low) = 1900/min, II (high) = 2885 /min |
| Blade diameter | 140mm (5.51”) |
| Mounting bore | 62mm (2.44”) |
| Weight | 17,5 kg (38.6 lbs) |
| Loading capacity of supports | 465 kg, 1025 lb (3 supports) |
Max. wall thickness:
45mm (1.8“) cast iron, 45mm (1.8“) plastic
Pipe OD:
110mm - 360mm (4“ - 15“)
Pipe material:
Aluminum, Cast iron, Ductile (nodular cast iron), Glass fiber, Plastic, Stainless/Inox steel, Steel
Max. wall thickness:
15 mm (0.59") steel / 110V, 20mm (0.8”) steel / 230V, 50 mm (2”) plastic
Pipe OD:
100mm – 460mm (4”- 18”)
Pipe material:
Cast iron, Copper, Ductile (nodular cast iron), Glass fiber, Multi-layered materials, Plastic, Stainless/Inox steel, Steel
Max. wall thickness:
8 mm (0.31“) steel, 14 mm (0.55“) plastic
Pipe OD:
15mm – 170mm (0.6”- 6.7”)
Pipe material:
Aluminum, Cast iron, Copper, Multi-layered materials, Plastic, Stainless/Inox steel, Steel
Leave a note – our customer service will get back to you soon.