No outlet within reach, or a cable run through three floors of an occupied building: that is where a battery pipe saw earns its place. A corded machine solves a different problem, with full wall capacity and no charge to manage. This article compares two pairs: the PipeCut 170E and PipeCut 170 Battery for metal and multi-material pipe, and the PipeCut P400E and PipeCut P400 Battery for plastic pipe. For the wider range, see our complete pipe saw model comparison.

Site Conditions That Decide the Choice
Power availability is the first filter. With a stable supply within a sensible cable run, a corded machine is simpler to manage. In a trench, on a roof deck or in a building before power is connected, the battery format removes the constraint. The second filter is wall thickness: the battery models have a lower wall capacity than their corded twins.
PipeCut 170E vs PipeCut 170 Battery
| Specification | PipeCut 170E | PipeCut 170 Battery |
|---|---|---|
| Pipe OD | 15 to 170 mm | 15 to 170 mm |
| Max wall, steel | 8 mm | 5 mm |
| Max wall, plastic | 14 mm | 14 mm |
| Power | 1100 W (110 V), 1200 W (220 V) | 730 W, 18 V |
| Speed | 1600 to 3500 rpm, presets 4 / 5 / 6 | 3500 rpm no-load |
| Blade fitted | TCT 140 | Cermet THIN 140 |
| Weight | 5.7 kg (110 V), 6.0 kg (220 V) | 5.2 kg without battery, 6.0 kg with battery |
| Batteries and charger | Not applicable | Two 18 V 5.0 Ah batteries and a charger included |
| Supports | 4 × Pipe Support 170, 314 kg | 4 × Pipe Support 170, 190 kg |
| Materials | Steel, stainless/inox, cast iron, glass fibre, aluminium, copper, plastics | |
Both take 140 mm blades with a 62 mm bore, so blade stock transfers between them. For the 170E’s larger sibling, see PipeCut 170E vs 220E.
PipeCut P400E vs PipeCut P400 Battery
| Specification | PipeCut P400E | PipeCut P400 Battery |
|---|---|---|
| Pipe OD | 50 to 400 mm | 50 to 400 mm |
| Max wall, cut only | 25 mm | 20 mm |
| Max wall, cut and bevel | 22 mm | 18 mm |
| Materials | Plastic pipe such as PE, PP, PVC | Plastic pipe such as PE, PP, PVC |
| Speed | 1600 to 3500 rpm with speed preselection | 3500 rpm no-load |
| Blades | TCT P150 fitted, Cut&Bevel blade 148 included | TCT P150 fitted, Cut&Bevel blade 148 included |
| Weight | 6.0 kg | 6.2 kg without battery, 7.0 kg with battery |
| Batteries and charger | Not applicable | Two 18 V 5.0 Ah batteries and a charger included |
| Supports | 2 × P400 Single, 1 × P400 Double; 260 kg with 3 supports | 4 × P400 Single; 260 kg with 4 supports |
Both cut and bevel at 15° in one pass, both can run cut only or bevel only, and both use solid rubber tire wheels instead of a gripper unit so the pipe is not marked. For technique, see our guide to cutting plastic pipe clean and square.
What the Battery Model Gives You
- No cable across walkways, stairwells or trenches
- Faster moves between cut points on a large site
- Work before the site power is connected
- Two batteries and a charger in the package, so one can charge while the other cuts
What You Give Up With the Battery Model
- A lower wall capacity: 5 mm steel instead of 8 mm on the 170, and 20 mm plastic instead of 25 mm on the P400
- One no-load speed instead of adjustable speed settings
- Charge management through the working day
- Reduced lithium-ion capacity in the cold, so keep spare batteries warm in winter
Runtime, cuts per charge and charging time are not published on the product pages. If they are critical to your planning, ask your distributor with your pipe material and wall thickness.
Five Situations Where the Battery Is the Right Choice
- New builds before power is connected. Pipework can start alongside other trades.
- Trench and excavation work. No mains cable to run into the trench.
- Renovation in occupied buildings. No cable through corridors and stairwells.
- Remote infrastructure. Water treatment, agricultural and rural sites without convenient power.
- Roof and plant deck work. No cable to manage at height.
The Two-Machine Solution
Many contractors stock both formats: the corded machine for workshop and powered-site cutting, and the battery machine for awkward locations. Within each pair, the blades are shared: 140 mm blades for the 170E and 170 Battery, and the TCT P150 and Cut&Bevel blade 148 for the P400E and P400 Battery.
Frequently Asked Questions
Are batteries included with the battery models?
Yes. The PipeCut 170 Battery and P400 Battery each come with two 18 V 5.0 Ah lithium-ion batteries and a charger.
Does the battery version cut the same wall thickness?
No. The 170 Battery cuts up to 5 mm steel against 8 mm for the 170E. The P400 Battery cuts up to 20 mm plastic against 25 mm for the P400E.
How many cuts do I get per charge?
Cuts per charge are not published. They depend on pipe material, wall thickness and blade condition, so plan spare batteries for high-volume days.
Check Availability With Exact Tools
Choose corded for full wall capacity and continuous cutting, and battery for sites without accessible power. Confirm stock and configuration with your local distributor, or send us your pipe material, wall thickness and site conditions through our contact page.