Pipe Saw Blades: How to Choose TCT, Cermet, INOX, ALU or Diamond

Ordering the wrong blade costs more than the blade itself: a ruined cut, a stopped job and time lost. This guide covers every blade and disc family for PipeCut saws, which material each one is made for, and how to order the right one. For running blades well once they are fitted, see our guide to getting more cuts from every pipe saw blade.

Blade First or Machine First?

Your machine decides which blade diameters fit. Confirm the diameter and bore first, then choose the blade family by material. See which blade fits which PipeCut machine and our compatibility and cutting depth charts.

Blade Families at a Glance

Family Tip Made for Diameters Cut and bevel version
TCT Tungsten carbide General purpose: steel, stainless steel, aluminium, copper, plastics (TCT 140) 140, 165 mm (plus Z140) No
TCT P Tungsten carbide Plastic pipe 150, 190, 250 mm Cut&Bevel blades 148 and 190
Cermet Ceramic alloy Heavy-duty cutting, especially acid-proof steel 140, 140 THIN, 165, 180 mm No
Cermet V Ceramic alloy Very thin walls, ventilation duct (V800E only) 155 mm No
INOX Ceramic Stainless and acid-proof steel 140, 140 Thin mm No
ALU Tungsten carbide Aluminium 140, 165, 180 mm No
Diamond X Diamond disc Cast iron and glass fibre 140, 165, 180 mm Diamond Cut&Bevel discs 140 and 165

TCT Blades: Tungsten Carbide for General Use

The TCT 140 is a 140 mm general-purpose blade with 46 tungsten carbide teeth on a steel body and a 1.8 mm kerf. It suits steel, stainless steel, aluminium, copper and plastics, and fits the 170E, 220E, 220 Pro, 360 Pro, 460 Pro, Infinity and HYDRA. The TCT Z140 is an affordable 140 mm option for occasional pipe cutting, and the TCT 165 is the general-purpose 165 mm blade. To choose within the 140 mm format, see TCT 140 vs Cermet 140 vs Cermet 140 THIN.

For plastic pipe, the TCT P blades give the best results: the TCT P150, TCT P190 and TCT P250. The P250 is the largest blade for plastic pipe, with 48 teeth whose larger size and wider spacing reduce clogging, and it fits the P1000 only.

Cermet Blades: Ceramic Tips for Heavy-Duty Work

Cermet blades have ceramic alloy tips described as ideal for heavy-duty cutting and precise cuts, especially recommended for acid-proof steel, with enhanced durability compared with standard TCT blades. The range is the Cermet 140, the Cermet 140 THIN, the Cermet 165 and the Cermet 180. The Cermet 140 THIN has a 1.2 mm body and 1.4 mm kerf, about 15% thinner than the Cermet 140. The Cermet 165 is fitted as standard on the 220 Pro, 360 Pro, Infinity and HYDRA 360.

The Cermet V155 is for very thin ventilation pipe walls and for use only with the V800E.

INOX Blades: Dedicated to Stainless Steel

The INOX 140 has ceramic tips dedicated to stainless and acid-proof steel, with 46 teeth and a 1.65 mm kerf. In Exact’s cutting test it gave over 100 cuts without performance loss on 169 mm × 3 mm 304L stainless pipe. It fits the 170E, 220E, 220 Pro, 360 Pro, 460 Pro, INOX 220, INOX 360, Infinity and HYDRA. The INOX 140 Thin is the thin version. The TCT 140 lists stainless steel too, but for regular stainless work the INOX blades are the dedicated choice. See our stainless setup guide.

ALU Blades: For Aluminium

The ALU 140, ALU 165 and ALU 180 are made for aluminium pipe. Match the diameter to your machine.

Diamond Discs: Cast Iron and Glass Fibre

Diamond discs abrade rather than chip, and they are the choice for cast iron and glass fibre. The Diamond X140 fits the 170E, 220E, 220 Pro, 360 Pro, 460 Pro, Infinity and HYDRA. The Diamond X165 fits the 220 Pro, 360 Pro, 460 Pro, Infinity and HYDRA. The Diamond X180 completes the series. Use them only on the materials they are made for.

Cut and Bevel Blades and Discs

  • Cut&Bevel blade 148: plastic pipe, 15° bevel, walls up to 22 mm; fits the P400E, P400 Battery and P1000.
  • Cut&Bevel blade 190: plastic pipe, 15° bevel, walls up to 40 mm; P1000 only.
  • Diamond Cut&Bevel disc 165: cast iron and glass fibre, 15° bevel, walls up to 25 mm; used with the wider lower blade guard included in a Cut+Bevel package.

Blade Selection by Pipe Material

Material First choice Alternative
Carbon steel TCT 140 / TCT 165 Cermet 140 / 165 / 180 for heavy-duty cutting
Stainless and acid-resistant steel INOX 140 / INOX 140 Thin Cermet (especially recommended for acid-proof steel)
Cast and ductile iron Diamond X140 / X165 / X180 Diamond Cut&Bevel disc 165 when a bevel is needed
Glass fibre Diamond X140 / X165 / X180 Diamond Cut&Bevel disc 165 when a bevel is needed
Aluminium ALU 140 / 165 / 180 TCT 140
Copper TCT 140 / TCT 165
PVC, PE, HDPE, PP TCT P150 / P190 / P250 Cut&Bevel blade 148 or 190 when a bevel is needed
Thin-wall ventilation duct Cermet V155 (V800E only)

What Shortens Blade Life?

  • The wrong blade for the material.
  • Forcing the feed. Let the blade cut at its own pace.
  • Poor pipe support. A pipe that closes on the blade stresses the tips.
  • Running a worn blade. Replace it before chips turn into fine dust, as Exact’s technical report on steel chips recommends.

Frequently Asked Questions

Which blade cuts stainless steel pipe?

The INOX 140 and INOX 140 Thin are dedicated to stainless and acid-proof steel. Cermet blades are also especially recommended for acid-proof steel.

Can a diamond disc cut steel?

The Diamond X discs are for cast iron and glass fibre. Use them only on the materials they are made for.

Which blade is best for plastic pipe?

The TCT P blades. Add a Cut&Bevel blade on the P400E, P400 Battery or P1000 when the pipe end needs a 15° bevel.

Order the Right Blade Through Exact Tools

If you are not sure which blade your machine takes, send us your machine model, pipe material and wall thickness through our contact page. When you are ready to buy, order through your distributor or browse the full blades and discs range.

Share this post

Contact Us

Contact