Blade diameter compatibility: which blade fits which PipeCut machine

You have a PipeCut machine on site and a blade to replace. Two things must match: the blade’s outer diameter and its mounting bore. This page maps both for the current PipeCut range, using the machines’ product pages. If you are still choosing a machine, see our complete pipe saw model comparison.

Two Measurements Must Match

Outer diameter decides how deep the blade reaches and whether it fits the guard. Mounting bore is the centre hole that fits the machine’s spindle. Almost every PipeCut machine uses a 62 mm bore; the V800E is the exception. Once diameter and bore match, the pipe material decides the blade family, which our blade selection guide covers.

PipeCut Blade Compatibility Chart

Machine Blade diameters Bore Blade fitted as standard
PipeCut 170E 140 mm 62 mm TCT 140
PipeCut 170 Battery 140 mm 62 mm Cermet THIN 140
PipeCut 220E 140 mm 62 mm TCT 140
PipeCut 220 Pro Series 140, 165, 180 mm 62 mm Cermet 165
PipeCut 360 Pro Series 140, 165, 180, 190 mm 62 mm Cermet 165
PipeCut 460 Pro Series 140, 165, 180, 190 mm 62 mm See product page
INOX 360 140 mm 62 mm INOX 140
PipeCut Infinity 140, 165, 180, 190 mm 62 mm Cermet 165
PipeCut HYDRA 360 140, 165, 180, 190 mm 62 mm Cermet 165
PipeCut P400E 140, 150 mm 62 mm TCT P150, plus Cut&Bevel blade 148
PipeCut P400 Battery 140 to 150 mm 62 mm TCT P150, plus Cut&Bevel blade 148
PipeCut P1000 140, 148, 150, 165, 180, 190, 250 mm 62 mm TCT P190
PipeCut V800E Cermet V155 only 65 mm Cermet V155

For the INOX 220 and HYDRA Infinity, confirm blade options on the product pages. The INOX 140 blade lists the INOX 220 among its compatible machines. Our blade compatibility and cutting depth charts give the blade-by-machine matrix. A blade being technically mountable on a machine does not mean it is recommended for it.

Blades Tied to Specific Machines

The 140 mm Family

The 170E product page lists TCT 140, TCT Z140, Cermet 140, Cermet 140 THIN, INOX 140, INOX 140 Thin, ALU 140 and Diamond X140 as compatible 140 mm blades. To choose between the general-purpose and heavy-duty options, see TCT 140 vs Cermet 140 vs Cermet 140 THIN.

What Happens If You Fit the Wrong Blade

The bore does not match: the blade will not seat on the spindle. The diameter is outside the machine’s range: do not fit it. The blade is not made for the material: it may mount, but cut quality and blade life suffer. A diamond disc, for example, is for cast iron and glass fibre only.

Ordering the Correct Replacement Blade

  1. Note your machine model.
  2. Check its blade diameters and bore in the chart above or in the operating manual.
  3. Confirm the pipe material and wall thickness.
  4. Choose the blade family for the material from the blades and discs range.
  5. Order through your distributor, quoting the machine model and blade product name.

Once the blade is fitted, our guide to getting more cuts from every pipe saw blade covers speed, feed and wear.

Frequently Asked Questions

Do the 170E and 220E take the same blades?

Yes. Both take 140 mm blades with a 62 mm bore and ship with a TCT 140.

Which machines take 190 mm blades?

The 360 Pro Series, 460 Pro Series, Infinity, HYDRA 360 and P1000 list 190 mm blades.

Can the Cermet V155 be used on other saws?

No. It is for use only with the V800E, which has a 65 mm bore.

Machine Documents and Support From Exact Tools

If the manual does not answer your question, our service and support team can help. When you have confirmed the machine, diameter, bore and material, order the correct blade through your distributor, or ask us through our contact page.

Share this post

Contact Us

Contact