PipeCut 220E vs PipeCut 220 Pro Series 2.0: occasional use vs daily production

The PipeCut 220E and the PipeCut 220 Pro Series 2.0 share a 220 mm ceiling, but they sit in different machine classes. The 220E is the lighter Classics saw. The 220 Pro Series doubles the steel wall capacity and adds a wider blade range, a traffic light system, a laser indicator, blade depth adjustment and a Cut&Bevel option. For the full range, see our complete pipe saw model comparison.

PipeCut 220E pipe saw

Same Ceiling, Different Machine Class

The “220” in both names refers to the maximum pipe outside diameter: 220 mm. Below that ceiling, the two saws differ in how thick a wall they cut, which blades they take, how speed is set and which features help the operator.

Technical Specifications Side by Side

Specification PipeCut 220E PipeCut 220 Pro Series 2.0
Pipe OD 15 to 220 mm 20 to 220 mm
Max wall, steel 8 mm 16 mm
Max wall, plastic 14 mm 35 mm
Power 1100 W (110 V), 1200 W (220 V) 1600 W
Speed control 1600 to 3500 rpm, presets 4 / 5 / 6 Two speeds: I 1900 rpm, II 2885 rpm
Blade diameters 140 mm 140, 165, 180 mm
Blade fitted TCT 140 Cermet 165
Weight 6.0 kg 11.5 kg
Supports included 4 × Pipe Support 280, 314 kg 4 supports, 314 kg
Electronics Speed preselection, soft start, torque control, automatic fuse Speed preselection, soft start, torque control, automatic fuse
Traffic light system Not listed Yes
Laser indicator Not listed Yes
Blade depth adjustment Not listed Standard
Cut&Bevel conversion Not listed Yes, with the Cut+Bevel package 220 PRO
Materials Steel, stainless/inox, cast iron, glass fibre, aluminium, copper, plastics

What the 220 Pro Series Adds

  • Double the steel wall capacity: 16 mm against 8 mm, and 35 mm against 14 mm in plastic.
  • A wider blade range: 140, 165 and 180 mm blades, with a Cermet 165 fitted as standard.
  • A traffic light system and laser indicator: the laser shows the cutting point and the traffic light system supports cutting precision. Our guide to cutting steel pipe square with a portable pipe saw shows how both fit into the cutting sequence.
  • Blade depth adjustment: set the depth to suit the wall you are cutting.
  • Cut&Bevel conversion: the Cut+Bevel package 220 PRO cuts and bevels cast iron and ductile iron pipe in one pass.

How Speed Is Set on Each Machine

The 220E runs from 1600 to 3500 rpm, with preset 4 for stainless and acid-resistant steel, 5 for steel and 6 for all other materials. The 220 Pro Series has two speeds: setting I at 1900 rpm and setting II at 2885 rpm. In the Pro Series operating instructions, the low setting is for stainless and acid-proof steel and the high setting is for other materials.

Weight and Handling

The 220E weighs 6.0 kg and the 220 Pro Series 11.5 kg. If you carry the saw up ladders or between floors all day, the lighter machine matters. If the pipe walls are thicker than 8 mm, the Pro Series is the machine that can cut them.

Which One Fits Your Work?

  • Choose the 220E if your steel walls stay within 8 mm, you want the lightest machine and a single 140 mm blade stock.
  • Choose the 220 Pro Series if you cut steel walls above 8 mm or plastic walls above 14 mm, want the laser, traffic light system and depth adjustment, or need to cut and bevel cast and ductile iron.

If your diameters regularly exceed 220 mm, compare the 220 Pro Series and 360 Pro Series. For the 220E’s smaller sibling, see PipeCut 170E vs 220E.

Frequently Asked Questions

Do the 220E and 220 Pro Series use the same blades?

Partly. Both take 140 mm blades with a 62 mm bore. The 220 Pro Series also takes 165 and 180 mm blades and ships with a Cermet 165, while the 220E ships with a TCT 140.

How thick a steel wall can each saw cut?

The 220E cuts up to 8 mm steel and the 220 Pro Series up to 16 mm. In plastic, the limits are 14 mm and 35 mm.

Can either machine cut and bevel in one pass?

The 220 Pro Series can be converted with the Cut+Bevel package 220 PRO, which cuts and bevels cast iron and ductile iron pipe.

Which saw is lighter to carry?

The 220E, at 6.0 kg against 11.5 kg for the 220 Pro Series.

Make Your Choice With Exact Tools

Choose by wall thickness first, then by the features you need on site. If you are unsure, send us your pipe sizes, wall thicknesses and materials through our contact page, or find a dealer on our distributors page. For larger pipe, see the PipeCut 360 Pro Series.

Share this post

Contact Us

Contact