Pipe Beveller 220E vs 360E: matching the beveller to your pipe range

The Pipe Beveller 220E and 360E share the same wall limit, materials, cutting heads and stopper. The split is pipe diameter, with an overlap in the middle. Read on to find the right machine for your pipe range, or see our guide to using a pipe beveling machine for setup and operation.

Quick Answer: Which One Fits Your Work?

For pipe from 25 to 220 mm OD, choose the Pipe Beveller 220E. For pipe from 110 to 360 mm OD, choose the Pipe Beveller 360E. Between 110 and 220 mm either machine works, so the smallest and largest pipes on your schedule decide.

Specifications Side by Side

Specification Pipe Beveller 220E Pipe Beveller 360E
Pipe OD 25 to 220 mm (0.98 to 8.6 in) 110 to 360 mm (4 to 15 in)
Max wall 10 mm steel 10 mm steel
Materials Steel, stainless steel, aluminium Steel, stainless steel, aluminium
Cutting heads 30°, 37.5°, 45°, tailored angles on request 30°, 37.5°, 45°, tailored angles on request
Tips 3 per head, 4 cutting edges each 3 per head, 4 cutting edges each
No-load speed 3500 to 8000 rpm 3500 to 8000 rpm
Weight 6.7 kg 11.2 kg
Built-in stopper Yes Yes
Included Beveller, shoulder bag, 2 pipe supports, instructions, 5 mm Allen key Beveller, shoulder bag, 2 pipe supports, instructions, 5 mm Allen key

Cutting heads and tips are sold separately on both models, and the head must match the bevel angle your welding procedure requires.

Pipe Beveller 220E

Pipe Diameter Decides the Choice

Think about your last three projects. If the smallest pipe was below 110 mm, only the 220E reaches it. If the largest was above 220 mm, only the 360E reaches it. If your work spans both ends, a crew may need both machines.

Wall Thickness: a Shared 10 mm Limit

Both machines bevel steel walls up to 10 mm. For thicker walls, neither is the right tool, so confirm the wall on every pipe size before you choose.

Repeatable Bevels With the Built-in Stopper

Both models have a built-in stopper that lets you repeat the same bevel on pipes with the same outside diameter. Set and check the first pipe, then bevel the rest of the batch to the same setting. Because the user interface is similar to the PipeCut pipe saws, saw operators adapt quickly.

Cutting Heads and Bevel Tips

Both models use the same cutting heads and bevel tips. Each head carries three tips with four cutting edges each. All three tips are turned to a fresh edge together, or replaced, rather than sharpened on site. A stainless bevel tip set (3 pcs) is available for stainless work.

Pairing Your Beveller With Your Pipe Saw

A pipe saw makes the square cut and the beveller shapes the end. The 220E pairs naturally with the PipeCut 220 Pro Series (20 to 220 mm), and the 360E with the PipeCut 360 Pro Series (75 to 360 mm). On cast and ductile iron, the Cut+Bevel package for the 360 Pro, 460 Pro and Infinity cuts and bevels in one pass. Plastic pipe is cut and beveled at 15° on the P400E and P1000. See cut and bevel in one pass vs beveling as a second operation.

Pipe Beveller 360E

Three Buying Scenarios

Welding contractor: carbon steel joints in the workshop and on site

Buy to your regular pipe range. The 220E covers small and medium pipe from 25 mm. The 360E covers headers and main runs up to 360 mm.

Maintenance team with unpredictable sizes

Check the smallest and largest pipes on site. If they fall on both sides of the 110 to 220 mm overlap, plan for both machines.

Stainless fabrication

Both models bevel stainless steel. Fit the stainless tips and keep tooling separate from carbon steel. See our stainless pipe saw setup guide for the cutting stage.

Frequently Asked Questions

Can the 220E and 360E bevel copper or plastic pipe?

The product specifications list steel, stainless steel and aluminium. For plastic pipe, the P400E and P1000 cut and bevel at 15° with Cut&Bevel blades.

Which bevel angles are available?

30°, 37.5° and 45° cutting heads, with tailored angles on request.

Which model is lighter?

The 220E, at 6.7 kg against 11.2 kg for the 360E.

Confirm Your Choice With Exact Tools

Browse the beveller range, then send us your pipe OD range, wall thickness, material and bevel angle through our contact page, or check availability with your distributor.

Share this post

Contact Us

Contact