INOX 220 and INOX 360 vs standard Pro Series: when stainless needs a dedicated machine

Stainless steel pipe does not behave like carbon steel, and your cutting setup should reflect that. This page compares the INOX 220 and INOX 360, explains what separates them from the standard Pro Series, and helps you decide when a dedicated stainless saw is worth it. For the wider range, see our complete pipe saw model comparison.

Why Stainless Steel Needs Separate Treatment

Stainless and acid-resistant grades need a blade made for them, the right speed setting and contamination control. Carbon steel particles left on a stainless surface can cause rust spots, which is why stainless work is often kept apart from carbon steel tooling and debris.

INOX 220 and INOX 360: What the Dedicated Machines Include

The INOX 220 is a cutter for stainless and acid-resistant materials on pipe up to 220 mm. The INOX 360 is the INOX version of the 360 Pro Series 2.0.

INOX 360 specification Value
Pipe OD 75 to 360 mm
Max wall 15 mm stainless
Material Stainless / inox (acid-resistant steel)
Speeds Low 1900 rpm, high about 2885 to 2900 rpm
Blade INOX 140 pre-installed, 140 mm, 62 mm bore
Weight 17.5 kg
Supports 1 double and 2 single, 465 kg with 3 supports
Features Speed preselection, overload protection, soft start, torque control, laser pointer, traffic light system
Gripper Redesigned with stainless steel wheels to protect pipe surfaces

Exact states the INOX 360 gives up to 10 times more cuts on stainless steel than previous solutions.

Can a Standard Pro Series Machine Cut Stainless Steel?

Yes. The 220 Pro Series and 360 Pro Series both list stainless and inox among their materials. In the Pro Series operating instructions, speed setting I is for stainless and acid-proof steel. The INOX 140 blade fits the 220 Pro, 360 Pro, 460 Pro, Infinity and HYDRA as well as the INOX machines. The PipeCut 170E and 220E have preset 4 for stainless and acid-resistant steel.

A dedicated INOX machine makes most sense when:

  • stainless is most of your cutting, so one machine can stay on stainless only;
  • your workshop handles carbon steel and stainless in rotation, and you want to keep carbon steel debris off stainless pipe;
  • you want a gripper with stainless steel wheels to protect the pipe surface.

For the full stainless setup, see our stainless pipe saw setup guide.

INOX 140 and INOX 140 Thin Blades

The INOX 140 has ceramic tips dedicated to stainless and acid-proof steel, 46 teeth and a 1.65 mm kerf. In Exact’s cutting test it gave over 100 cuts without performance loss on 169 mm × 3 mm 304L stainless pipe. The INOX 140 Thin is the thin version for stainless. Cermet blades are also especially recommended for acid-proof steel. See our blade selection guide.

INOX 220 or INOX 360?

Choose the INOX 220 if your stainless work stays up to 220 mm OD. Choose the INOX 360 for stainless pipe from 75 to 360 mm with walls up to 15 mm. For stainless above 360 mm, see our guide to large-diameter pipe cutting with the PipeCut Infinity.

Frequently Asked Questions

What blade does the INOX 360 use?

It comes with an INOX 140 pre-installed: a 140 mm ceramic-tip blade dedicated to stainless and acid-proof steel.

How thick a stainless wall can the INOX 360 cut?

Up to 15 mm, on pipe from 75 to 360 mm OD.

Which speed setting is used for stainless on the Pro Series?

Setting I, the 1900 rpm low setting, per the Pro Series operating instructions.

Build Your Stainless Cutting Setup With Exact Tools

If you are unsure which machine and blade fit your stainless work, talk to us about a stainless setup, or find a dealer on our distributors page. For weld preparation after the cut, the pipe bevellers bevel stainless steel with dedicated stainless tips.

Share this post

Contact Us

Contact